Showing 1–12 of 20 results

Audience Forte F3 PowerChord

Audience Forte F3 PowerChord

$312.00$406.00

The forte f3 powerChord is an entry level priced high performance powerChord. Over 20 years of Audience high performance powerChord DNA technology is embedded in the forte f3. The forte f3 powerChord provides end users with an extremely affordable product with unbeatable performance, far beyond its price range. The forte f3 powerChord is a high current 10 AWG design made with high purity stranded copper wire so it is flexible and user friendly. It’s geometry is a proprietary design that rejects noise while balancing energy flow for lowest eddy current resistance. The brass contacts have been cryogenically treated at the Audience cryogenic laboratory.

AudioQuest Blizzard AC Power CableAudioQuest Blizzard AC Power Cable

AudioQuest Blizzard AC Power Cable

$749.95$1,899.95

Low-Z / Noise-Dissipation 3-Pole AC Power Cable

  • Perfect-Surface Copper+ (PSC+) Conductors
  • True-Concentric Conductors Minimize Strand Interaction & Magnetic Confusion
  • Ground Noise Dissipation Technology (US Patent # 9,373,439)
  • ZERO: No Characteristic Impedance
  • 72VDC Dielectric Bias System (US Patent #7,126,055)
  • Directionally Controlled Conductors
AudioQuest Dragon Constant-Current (Source) AC Power Cable

AudioQuest Dragon Constant-Current (Source) AC Power Cable

$5,650.00$14,350.00

Alternating Current (AC), is a far-from-perfect power source. AC power technology is well over a century old and was never designed to meet the exacting standards of today’s high resolution audio-video components. AC noise is present at the utility source, and is then exacerbated by radio frequency noise that is induced (picked up by the AC power cord) and coupled to the component power supplies and to circuit ground. This creates distortion and low-level signal losses via the “masking effect.” Most AC power cords and power conditioner-regenerators, though helpful to a point, are simply not up to the task.

Note: AudioQuest Dragon/Source AC power cable is not appropriate for use with AC power conditioners, power regenerators, AC isolation transformers, AC battery back-up devices, as well as any power amplifier, powered sub-woofer, powered loudspeaker, powered receiver, or integrated amplifier (whether tube, solid state or digital switching). These products will require greater RMS and transient current capacity. In extreme instances, they could suffer diminished performance and/or present an electrical danger by exceeding the AudioQuest Dragon/Source AC power cable’s maximum current capacity. For those applications, we highly recommend selecting the AudioQuest’s Dragon/High-Current AC power cable.

AudioQuest Dragon Variable Current (High-Current) AC Power Cable

AudioQuest Dragon Variable Current (High-Current) AC Power Cable

$7,000.00$18,400.00

Alternating Current (AC), is a far-from-perfect power source. AC power technology is well over a century old and was never designed to meet the exacting standards of today’s high resolution audio-video components. AC noise is present at the utility source, and is then exacerbated by radio frequency noise that is induced (picked up by the AC power cord) and coupled to the component power supplies and to circuit ground. This creates distortion and low-level signal losses via the “masking effect.” Further, power amplifiers can require immense reserves of transient current for their power supplies to react to and then stabilize during dynamic audio passages. Most AC power cords and power conditioner-regenerators, though helpful to a point, are simply not up to the task.

Power amplifiers present a real challenge for any AC power source, as the transient current requirements (though short in duration) can be many times that of the average (RMS) current consumption. Power amplifiers are also unique from all other components in that the current draw is dynamic, not constant, and it changes with volume and audio signal content. Though many AC power cords may feature low DC resistance to allow for some of this requirement, the characteristic impedance of the AC cable is equally responsible for assuring uncompromised performance. Many premium AC cords constrict or compress the audio transient as their characteristic impedance restricts the transient current.

AudioQuest FireBird Constant-Current (Source) AC Power Cable

AudioQuest FireBird Constant-Current (Source) AC Power Cable

$3,750.00$8,650.00

Alternating Current (AC), is a far-from-perfect power source. AC power technology is well over a century old and was never designed to meet the exacting standards of today’s high resolution audio-video components. AC noise is present at the utility source, and is then exacerbated by radio frequency noise that is induced (picked up by the AC power cord) and coupled to the component power supplies and to circuit ground. This creates distortion and low-level signal losses via the “masking effect.” Most AC power cords and power conditioner-regenerators, though helpful to a point, are simply not up to the task.

Note: AudioQuest FireBird/Source AC power cable is not appropriate for use with AC power conditioners, power regenerators, AC isolation transformers, AC battery back-up devices, as well as any power amplifier, powered sub-woofer, powered loudspeaker, powered receiver, or integrated amplifier (whether tube, solid state or digital switching). These products will require greater RMS and transient current capacity. In extreme instances, they could suffer diminished performance and/or present an electrical danger by exceeding the AudioQuest Dragon/Source AC power cable’s maximum current capacity. For those applications, we highly recommend selecting the AudioQuest’s FireBird/High-Current AC power cable.

AudioQuest FireBird Variable Current (High-Current) AC Power Cable

AudioQuest FireBird Variable Current (High-Current) AC Power Cable

$4,400.00$10,600.00

Alternating Current (AC), is a far-from-perfect power source. AC power technology is well over a century old and was never designed to meet the exacting standards of today’s high resolution audio-video components. AC noise is present at the utility source, and is then exacerbated by radio frequency noise that is induced (picked up by the AC power cord) and coupled to the component power supplies and to circuit ground. This creates distortion and low-level signal losses via the “masking effect.” Further, power amplifiers can require immense reserves of transient current for their power supplies to react to and then stabilize during dynamic audio passages. Most AC power cords and power conditioner-regenerators, though helpful to a point, are simply not up to the task.

Power amplifiers present a real challenge for any AC power source, as the transient current requirements (though short in duration) can be many times that of the average (RMS) current consumption. Power amplifiers are also unique from all other components in that the current draw is dynamic, not constant, and it changes with volume and audio signal content. Though many AC power cords may feature low DC resistance to allow for some of this requirement, the characteristic impedance of the AC cable is equally responsible for assuring uncompromised performance. Many premium AC cords constrict or compress the audio transient as their characteristic impedance restricts the transient current.

AudioQuest Hurricane Constant-Current (Source) AC Power Cable

AudioQuest Hurricane Constant-Current (Source) AC Power Cable

$1,799.95$3,099.95

Alternating Current (AC), is a far-from-perfect power source. AC power technology is well over a century old and was never designed to meet the exacting standards of today’s high resolution audio-video components. AC noise is present at the utility source, and is then exacerbated by radio frequency noise that is induced (picked up by the AC power cord) and coupled to the component power supplies and to circuit ground. This creates distortion and low-level signal losses via the “masking effect.” Most AC power cords and power conditioner-regenerators, though helpful to a point, are simply not up to the task.

Note: AudioQuest Hurricane/Source AC power cable is not appropriate for use with AC power conditioners, power regenerators, AC isolation transformers, AC battery back-up devices, as well as any power amplifier, powered sub-woofer, powered loudspeaker, powered receiver, or integrated amplifier (whether tube, solid state or digital switching). These products will require greater RMS and transient current capacity. In extreme instances, they could suffer diminished performance and/or present an electrical danger by exceeding the AudioQuest Hurricane/Source AC power cable’s maximum current capacity. For those applications, we highly recommend selecting the AudioQuest’s Hurricane/High-Current AC power cable.

AudioQuest Hurricane Variable Current (High-Current) AC Power Cable

AudioQuest Hurricane Variable Current (High-Current) AC Power Cable

$2,274.95$4,224.95

Alternating Current (AC), is a far-from-perfect power source. AC power technology is well over a century old and was never designed to meet the exacting standards of today’s high resolution audio-video components. AC noise is present at the utility source, and is then exacerbated by radio frequency noise that is induced (picked up by the AC power cord) and coupled to the component power supplies and to circuit ground. This creates distortion and low-level signal losses via the “masking effect.” Further, power amplifiers can require immense reserves of transient current for their power supplies to react to and then stabilize during dynamic audio passages. Most AC power cords and power conditioner-regenerators, though helpful to a point, are simply not up to the task.

Power amplifiers present a real challenge for any AC power source, as the transient current requirements (though short in duration) can be many times that of the average (RMS) current consumption. Power amplifiers are also unique from all other components in that the current draw is dynamic, not constant, and it changes with volume and audio signal content. Though many AC power cords may feature low DC resistance to allow for some of this requirement, the characteristic impedance of the AC cable is equally responsible for assuring uncompromised performance. Many premium AC cords constrict or compress the audio transient as their characteristic impedance restricts the transient current.

AudioQuest Mistral AC Power Bulk Cable

AudioQuest Mistral AC Power Bulk Cable

$133.00

Low-Z / Noise-Dissipation 3-Pole Bulk AC Power Cable

  • Perfect-Surface Copper+ (PSC+) & Long-Grain Copper (LGC) Conductors
  • True-Concentric Conductors Minimize Strand Interaction & Magnetic Confusion
  • Ground Noise Dissipation Technology (US Patent # 9,373,439)
  • Directionally Controlled Conductors

Mistral is sold in bulk only. For best results, use with AudioQuest’s high-performance Hanging-Silver over Red or Beryllium Copper Mistral AC plugs (available in US Wall, C13, or C19 versions).

AudioQuest Monsoon AC Power CableAudioQuest Monsoon AC Power Cable

AudioQuest Monsoon AC Power Cable

$429.95$1,199.95

Low-Z / Noise-Dissipation 3-Pole AC Power Cable

  • Perfect-Surface Copper+ (PSC+) & Long-Grain Copper (LGC) Conductors
  • True-Concentric Conductors Minimize Strand Interaction & Magnetic Confusion
  • Ground Noise Dissipation Technology (US Patent # 9,373,439)
  • ZERO: No Characteristic Impedance
  • Directionally Controlled Conductors
Audioquest NRG-X2 AC Power CableAudioquest NRG-X2 AC Power Cable

Audioquest NRG-X2 AC Power Cable

$84.95$179.95

AudioQuest’s award-winning NRG-X AC power cables were loved by many—experienced audiophiles and newcomers alike—for their unrivaled combination of performance and value. Compared to stock AC power cords or even premium cables at similar or higher prices, NRG-X cables have always delivered enhanced bass definition, improved transient articulation, greater soundstage scale, and more of the precious spatial cues that bring recorded music to life.

We are now delighted to offer the next generation of NRG-X AC cables, continuing the tradition of outstanding performance and exceptional value while complementing and enhancing today’s exciting electronics.

These new NRG-X Series power cables use Direction-Controlled Long-Grain Copper (LGC) in a Semi-Solid Concentric Topology—a sophisticated physical arrangement in which strands are packed more tightly and never change position within the bundle. Direction-Controlled LGC minimizes distortion caused by grain boundaries that exist in any metal conductor, which in turn assures induced noise is dissipated and drained properly—as always, we direct noise where it will do the least harm to your system’s performance.

While the earlier X cables had 37 strands in three layers over the single center strand, the new X-Series power cables have only seven larger strands comprising just a single uniform layer over a center strand. This refinement may sound simple, but the improved result is delightfully clear.

In addition, the 2-pole NRG-X2 uses our super-slim C7 female end to perfectly accommodate Sonos components, gaming consoles, and more.

Designed by AudioQuest to effectively lower noise in your audio/video system, our new X-Series power cables are true to music, allowing you to hear more of what’s on the recording. We invite you to experience the difference!

Available lengths: 1m, 2m, 3m, 4.5m, and 6m (3’4″, 6’7″, 10′, 14’9″, 19’9″). All NRG models are also available with EU and UK plugs.

AudioQuest NRG-X3 AC Power CableAudioQuest NRG-X3 AC Power Cable

AudioQuest NRG-X3 AC Power Cable

$99.95$229.95

AudioQuest’s award-winning NRG-X AC power cables were loved by many—experienced audiophiles and newcomers alike—for their unrivaled combination of performance and value. Compared to stock AC power cords or even premium cables at similar or higher prices, NRG-X cables have always delivered enhanced bass definition, improved transient articulation, greater soundstage scale, and more of the precious spatial cues that bring recorded music to life.

We are now delighted to offer the next generation of NRG-X AC cables, continuing the tradition of outstanding performance and exceptional value while complementing and enhancing today’s exciting electronics.

These new NRG-X Series power cables use Direction-Controlled Long-Grain Copper (LGC) in a Semi-Solid Concentric Topology—a sophisticated physical arrangement in which strands are packed more tightly and never change position within the bundle. Direction-Controlled LGC minimizes distortion caused by grain boundaries that exist in any metal conductor, which in turn assures induced noise is dissipated and drained properly—as always, we direct noise where it will do the least harm to your system’s performance.

While the earlier X cables had 37 strands in three layers over the single center strand, the new X-Series power cables have only seven larger strands comprising just a single uniform layer over a center strand. This refinement may sound simple, but the improved result is delightfully clear.

In addition, the 3-pole NRG-X3 is available with C13 and C5 female ends to accommodate a wide range of today’s new components.

Designed by AudioQuest to effectively lower noise in your audio/video system, our new X-Series power cables are true to music, allowing you to hear more of what’s on the recording. We invite you to experience the difference!

Available lengths: 1m, 2m, 3m, 4.5m, and 6m (3’4″, 6’7″, 10′, 14’9″, 19’9″). All NRG models are also available with EU and UK plugs.

Load more