Showing all 3 results

Key Digital 4K POH HDBaseT HDMI Extenders (TX/RX KIT)

Key Digital 4K POH HDBaseT HDMI Extenders (TX/RX KIT)

$299.00
  • HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
  • KD-X222PO: Features power extension from Tx to Rx with Power Over HDBaseT, Rx unit does not require power supply
  • Signal Extension:
    • Up to 150 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using KD-CAT6STP1X cabling
    • Up to 125 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using third-party CAT5e/6UTP/STP cabling
    • Up to 250 ft. @ 1080p /1920×1200 using KD-CAT6STP1X cabling
    • Up to 230 ft. @ 1080p /1920×1200 using third-party CAT5e/6 cabling
  • HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant
  • HDR (High Dynamic Range): More life-like images through a greater range of luminance levels
  • 4K/UHD Resolution: Supports signals up to 4096×2160 60Hz [4:2:0] 8bit, 4096×2160 30Hz [4:2:2] 12bit, and 4096×2160 30Hz [4:4:4] 8bit
  • Deep Color Support: Up to UHD/4K 30Hz 4:2:2/12 bits or 60Hz 4:2:0/8 bit
  • 3D: Support for standard 3D stereoscopic signal formats
  • Low Profile: Super slim chassis design
  • HDMI® and HDCP Licensing: Fully licensed and compatible with HDCP 2.2 and HDMI latest technology such as 4K/UHD 4:2:0/8bit at 60f/s
  • EDID Control: Internal library features 15 default EDID configurations and native EDID data from Output/Display devices connected via Rx
  • Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input devices
  • Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake, and Hot Plug control
  • IR Sensor: Sensor powering via +5V on Rx unit’s IR In port collects line-of-sight IR from remote(s) without external IR connecting block
  • Up/Down IR: Two channels of IR enable control to/from devices connected to Tx and Rx units
  • RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector
  • Rotary Switch RS-232 Control Mode: Provides control of Tx unit as well as connectivity status
  • Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™
  • CEC Support: For inter-device control between input and output HDMI channel
  • I2C Communication: EDID and HDCP authentication to Display and Source
  • Control System Support: Fully controllable by all RS-232 supported control systems via open API: Compass Control®, AMX®, Crestron®, KNX®, RTI®, Savant, URC®, Leviton® etc.
Pixelgen PXLDRIVE Max 4K Extender with HDMI Cable – Midnight Blue

Pixelgen PXLDRIVE Max 4K Extender with HDMI Cable – Midnight Blue

$729.00$799.00

PXLDRIVE is the industry’s first active long reach THX Certified 4K Interconnect solution, capable of boosting full-bandwidth 4K reach capabilities up to 15m. PXLDRIVE is a small signal processing device that is installed between pre-existing or new long-length passive UHD cable and the display. This retrofittable standalone solution is perfect for use with UHD 4K devices in dedicated cinema rooms where pre-existing long-reach cables are failing to meet the bandwidth requirements. A perfect upgrade path, saving time and money. Capable of reviving uncompressed UHD signals up to the maximum UHD bit rate, PXLDRIVE fills one of the biggest “missing links” in the custom installation market – a reliable 18Gbps UHD extender.

Pixelgen PXLDRIVE™ Max 4K Extender

Pixelgen PXLDRIVE™ Max 4K Extender

$599.99

PXLDRIVE™ Max 4K Extender for 18G UHD (placed at the display end of an Ultra HD link) is used to revive uncompressed Ultra HD signals up to the maximum 18Gbps bitrate over new or pre-existing passive long reach Ultra HD cables.