Monitor Audio Anthra W10 Subwoofer
$3,299.00
-
Free Shipping
-
The W10 is the most compact model within the Anthra subwoofer series. It features a 10” (25 cm) Rigid Surface Technology II (RST II) C-CAM high-excursion driver powered by a Class-D 500 Watt amplifier, housed within a comprehensively internally braced, sealed-box cabinet.
Engineered to deliver deep, agile bass in small to mid-sized spaces, the Anthra W10 subwoofer features a 500 Watt Class-D amplifier driving a 10” (25 cm) Rigid Surface Technology II (RST II) C-CAM high-excursion driver. The W10 can be used on its own or linked with up to three other Anthra subwoofers for a truly immersive, ultra-dynamic listening experience.
A full-colour LCD display and rotatory dial is located on the back panel, to allow for basic subwoofer setup and EQ preset selection, while advanced features including DSP configuration and multi-sub connectivity setup are available via the MaestroUnite app.
Intuitive Setup App
Advanced features, including DSP configuration and multi-sub connectivity setup, is available via the MaestroUnite app.
Cutting-edge Drivers
All Anthra subwoofer drivers feature Rigid Surface Technology II (RST II) and ceramic-coated aluminium magnesium cones (C-CAM).
Powerful Amplifiers
The amplifiers and their power supplies are designed in tandem, so they work together perfectly for better efficiency and lower distortion.
Acoustic Performance
Through the application of smart acoustic design and core Monitor Audio technologies, the Anthra Subwoofer Series can deliver the kind of deep, highly accurate bass output capable of dramatically enhancing your enjoyment of both movies and music. It’s controlled bass you can feel.
Two Channel
Subwoofers are about a lot more than adding bass effects to a movie soundtrack. The very best are also adept at adding low-end detail, atmospherics, and bass to a stereo hi-fi system; and the Anthra subs are the very best.
Home Cinema
When it comes to maximising your movie experience then a capable subwoofer is a key component. Whether it’s adding the thump of a special effect or enhancing the subtleties of a cinematic score, Anthra subwoofers maximise your enjoyment.
C-CAM
Strong and lightweight, the extremely rigid C-CAM cones have a much higher resistance to bending stress and therefore exhibit much greater fidelity over their entire operating range for a cleaner, clearer more precise lifelike sound presentation.
RST II
This is the first time Rigid Surface Technology II (RST II) has been applied to a Monitor Audio subwoofer cone. It significantly increases cone rigidity, allowing the radiating surfaces to resist the mechanical bending forces that can twist the shape of conventional driver cones, which can distort sound.
Class-D amplifiers
Behind each RST II C-CAM high-excursion driver lies a formidable amplifier capable of jaw-dropping power. With Class-D 425, 900 and a massive 1,400 Watts RMS at continuous levels with peak demand reaching 500, 1,700 and a massive 2,500 Watts, each amplifier ensures that the drivers are working to their optimum performance levels, no matter what the volume, allowing for an extremely accurate and clean dynamic range and a musical performance.
Cabinet strength
Anthra subwoofers utilise an extremely solid MDF cabinet, boasting up to 1.4-inch thick (36mm) external walls and 0.75-inch (19mm) thick internal walls with carefully configured bracing that has been acoustically optimised for extreme strength.
Connectivity
All Anthra subwoofers offer a comprehensive variety of connectivity options, such as RCA with LFE, and XLR inputs for professional installation, both of which allow multiple Anthra subwoofers to be used in a system. A full-colour display on the rear panel with rotatory dial offers access the setup selection menu, which allows consumers to not only undertake a quick setup procedure, but also to connect and integrate any Anthra subwoofer into a wider home cinema system with consummate ease.
Maestro Unite App
Using the in-house-designed MaestroUnite setup app, users can optimally configure any Anthra subwoofer to their individual tastes and system requirements. And if multiple subwoofers are used within a single system, it allows the same settings to be delivered across them all simultaneously.
Features & Specifications
Key Features
- 1 x 10” (25cm) Rigid Surface Technology II (RST II) and ceramic-coated aluminium magnesium (C-CAM) high-excursion driver for super-clean performance
- 1 x 500 Watt Class-D amplifier ensures that the driver is working to its optimum performance level, no matter what the volume
- Massive motor assembles and longer round-wound voice coils, which are dual layered and made of copper-coated aluminium wire (CCAW) for precise control at extreme low frequencies
- 2 inch full-colour LCD display screen with rotary dial for menu selection and basic setup
- RCA inputs (left/right. The left Input is LFE)
- RCA outputs allows daisy chain of up to 4 Anthra subwoofers
- XLR inputs for professional installation connectivity option
- XLR outputs allows daisy chain of up to four Anthra subwoofers
- Available in Gloss Black and Satin White finishes
System Format
Active – Sealed Cabinet
Drive Unit Complement
1x 254 mm (10″) High Linear-Excusion Triple Suspension Driver
Amplifier Classification
High-Efficiency Class-D
Lower Frequency Limit
-6dB @17Hz
Upper Frequency Limit
(LPF Off) -6dB @400Hz
Driver Excursion (pk-pk)
50 mm
DSP
28Bit 50MIPS Configuratable through MaestroUnite
Analogue Digital Conversion
Autoranging Input which combines a 10Vrms maximum input with low signal to noise for small signals
Amplifier Output Power, 240Vac
Instantaneous: 500 W*
Continuous short-term: 425 W**
Amplifier Output Power, 120Vac
Instantaneous: 450 W
Continuous short-term: 390 W
LED UI Control
Brightness, On-Off
Phase Control
0-360 Degrees measured at LPF Crossover
Low Pass Filter
20-200Hz LPF with Roll off Adjustable from -3 to -48dB/Oct in 3dB/Oct steps
Custom EQ
Configurable through MaestroUnite;3 pre-defined EQ curves plus 3 custom EQ curves each with 8 band custom EQ supporting (Peaking, High Shelf, Low Shelf, High Pass)
Volume Level
Wide adjustable input gain to allow maximum output from a wide range of input signals
Inputs
Stereo Unbalanced RCA (or mono/LFE using only connector marked LFE)Mono/LFE Balanced XLR
Outputs
Stereo unbalanced outputs with unbuffered throughput from RCA Inputs
Mono/LFE Balaned XLR outputs with unbuffered throughput from XLR Input
Mains Input Voltage
Universal Mains, 85-265VAC
External Dimensions (without feet) (HxWxD)
321 x 321 x 321 mm
Power Consumption
120 W
Cabinet Construction
Braced 18 mm thick MDF with 36 mm front baffle
Grille
Cloth covered magnetically attached Grilles
Weight
22.2 kg
* Maximum RMS output for an instantaneous signal
** Sinewave for 10 seconds
Reviews
There are no reviews yet.
You must be logged in to post a review.
Related products
-
-
JL Audio Dominion d108 Subwoofer $1,650.00 – $1,850.00 -
JL Audio Dominion d110 Subwoofer $1,950.00 – $2,200.00 -
Reviews
There are no reviews yet.