You must be logged in to post a review.
PSB Imagine XA Dolby Atmos Speaker
$799.00
- Free Shipping
-
Dolby Atmos® Speaker – Taking surround sound to new heights.
The Imagine XA is the latest addition to the Imagine X series, and the first PSB speaker to be Dolby Atmos® certified. Used as the elevation or height speaker in an affordable Dolby Atmos surround system, the Imagine XA creates an enthralling layer of sound – from above. The Imagine XA enables you to get the best and latest Dolby format, and has been used by Dolby themselves to flaunt their new Dolby Atmos® Multi-channel Surround specification.
Advanced vertically-firing driver array
Working with Dolby and using advanced acoustic research, PSB crafted the Imagine XA with custom-designed vertically firing drivers that accurately reflect sound off of your ceiling. The Imagine XA’s frequency response and directivity pattern have been specifically engineered to meet Dolby’s Atmos specifications so you can hear the lifelike detail of your favourite films as if you were truly there.
Add Dolby Atmos® to your existing home theatre system
The Imagine XA is purpose-built to fit on top of PSB’s Imagine X Series floor-standing and bookshelf speakers, creating a 5.1.2 to 7.1.4 or beyond Dolby Atmos enabled system from your existing home theatre setup. When combined with either the Imagine X2T or X1T, the Imagine XA can harness the power of the tower speakers, ultimately creating a richer listening experience.
Flexible to install
Unobtrusive in the home, the Imagine XA is small enough to sit atop your existing front or rear speakers, whether they are bookshelf or towers. It can also easily be mounted to a wall with the included brackets. Elevating the cinematic experience without the need to install in-ceiling speakers is what the XA is all about.
Features & Specifications
Frequency Response
On Axis @ 0° ±3dB | 100 – 23,000Hz |
LF Cutoff -10dB | 60Hz |
Sensitivity
Anechoic Chamber | 85dB |
Listening Room | 87dB |
Impedance
Nominal | 8 Ohms |
Minimum | 4 Ohms |
Input Power
Recommended | 10 – 80 Watts |
Program | 60 Watts |
Acoustic Design
Tweeter (Nominal) | 1″ (25mm) Titanium Dome with Ferrofluid
Neodymium Magnet |
Woofer | 4″ (102mm) Clay/Ceramic reinforced Injection Moulded Polypropylene Cone
Rubber Surround Turbo Magnet |
Crossover | 2,000Hz, B3 |
Design Type | Sealed |
Dimensions / Weight / Finish
Size (W x H x D) | 6 1/2 x 10 1/2 x 6 3/4”*
168 x 173 x 265mm |
Weight | Net – 6.5lb (2.9kg)/each
Shipping – 15.6lb (7.1kg)/each |
Notes | * Non-metric measurements are approximate.
All specifications are subject to change without notice. |
Reviews
There are no reviews yet.
You must be logged in to post a review.
Reviews
There are no reviews yet.