You must be logged in to post a review.
Accuphase A-36 CLASS-A STEREO POWER AMPLIFIER
The new A-36 inherits many of the outstanding design technology features developed for the higher-end models. It redefines the baseline for pure class A power amplifiers and represents the same unwavering attention to detail and dedication to sound quality for which Accuphase is justly famous.
In the output stage, power MOS-FETs renowned for their excellent frequency response, sonic performance, and superior reliability are used in a triple parallel configuration and driven in pure class A. This is sustained by the strong power supply featuring a massive transformer and two large 47,000μF filtering capacitors. Output power in each channel is rated for an impressive 150 watts into 1 ohm, 120 watts into 2 ohms, 60 watts into 4 ohms, and 30 watts into 8 ohms. Even speakers with ultralow impedance or drastic fluctuations in impedance curve can be driven reliably by this impressive amplifier.
In the output circuitry, MOS-FET switches are used in place of relays, to eliminate mechanical contacts and improve long-term reliability.
Features & Specifications
●Continuous Average Output Power (20–20,000 Hz) Note: Load ratings marked (*) apply only to
operation with music signals.
Stereo operation 150 watts per channel into 1 ohm (*)
(both channels driven) 120 watts per channel into 2 ohms
60 watts per channel into 4 ohms
30 watts per channel into 8 ohms
Monophonic operation 300 watts into 2 ohms (*)
(bridged connection) 240 watts into 4 ohms
120 watts into 8 ohms
●Total Harmonic Stereo operation (both channels driven)
Distortion 0.05% with 2 ohm load
0.03% with 4 to 16 ohm load
Monophonic operation (bridged connection)
0.05% with 4 to 16 ohm load
●Intermodulation Distortion 0.01%
●Frequency Response At rated output: 20 – 20,000 Hz +0, -0.2 dB
At 1 watt output: 0.5 – 160,000 Hz +0, -3.0 dB
● Gain 28.0 dB (with GAIN selector at MAX)
(Stereo and monophonic operation)
●Gain Selection MAX, -3 dB, -6 dB, -12 dB
●Output Load impedance
Stereo operation: 2 to 16 ohms
Monophonic operation: 4 to 16 ohms
With music signals only, 1-ohm loads are
permissible for stereo operation and 2-ohm loads
for monophonic operation.
●Damping Factor 400
●Input Sensitivity (with 8-ohm load, GAIN selector in MAX position)
Stereo operation: 0.62 V for rated continuous average output (30 W)
0.11 V for 1 watt output
Monophonic operation: 1.23 V for rated continuous average output (120 W)
0.11 V for 1 watt output
● Input Impedance Balanced: 40 kilohms Line: 20 kilohms
●Signal-to-Noise Ratio (A-weighted, input shorted)
112 dB (GAIN selector at MAX)
120 dB (GAIN selector at -12 dB)
At rated continuous average output
● Output Level Meters -40 dB to +3 dB (indication in dB and %)
Logarithmic scale
Operation selector: OFF / NORMAL / HOLD (∞)
Meter sensitivity selector (-20 dB)
*Monophonic operation: same value displayed for
left/right
●Power Requirements AC 120 V/230 V, 50/60 Hz
(Voltage as indicated on rear panel)
●Power Consumption 155 watts idle
270 watts in accordance with IEC 60065
●Maximum Dimensions Width 465 mm (18.31″)
Height 171 mm (6.73″)
Depth 425 mm (16.73″)
●Mass 22.8 kg (50.27 lbs) net
29.0 kg (63.93 lbs) in shipping carton
Reviews
There are no reviews yet.
You must be logged in to post a review.
Related products
-
ROTEL RC-1572 MKII STEREO PRE-AMPLIFIER $1,699.00
-
-
Acurus A2007 7-Channel, 200Wx7 Smart Power Amplifier $8,399.00 – $8,799.00
-
Reviews
There are no reviews yet.